The bathroom and the kitchen are the two rooms of our homes that, when remodeled, can add the most significant amount of value to it. They are the two centers of our houses, whether we realize it or not. A good house is usually inspected by a few different factors and these two are generally the focal points of many home buyers. Home buyers want to know if a property has a good kitchen and if it has a good bathroom. Depending on what they see, it can make or break a sale.
Unsightly water damage can usually be prevented to either area of the home unless it is caused by mother nature, such as flood or hurricane damage. What can you do to prevent water damage to the two most important rooms of your home..? Similar things can be done in each room to help keep the value of your home from going down.
Taking a bath or boiling water on the stove gives off steam, but there is not always a way for the steam to get out of the room if there is no vent installed. There should be a vent with a fan in each bathroom of the house and the kitchen, as well, to keep the steam from being absorbed by the walls. Drywall that has been damaged in this way usually starts to sag after a while because it has absorbed so much water and not only this, but mold will start to grow on walls that catch steam like this, as well. This is the perfect environment for mold to grow in.
Any plumbing in your bathroom or kitchen needs to be checked on a regular basis for cracks or weak spots in its connections. Anything in your house that uses water coming from the water system in your home needs to be checked on regularly to make sure the chance of a leak sneaking up on you is minimal. Some leaks can sneak up on you while you are away from home or asleep at night, but a lot of time it is caused by just not keeping an eye on worn hoses or damaged pipes.
Sometimes a water heater is located in a pantry or in an area near the kitchen, so keeping a check on this is a good idea, too. The water heater should be set inside of a drain pan that is connected to the water system of your home so that if it does leak, any water is directed down into the septic tank or the sewer.
Showing posts with label construction. Show all posts
Showing posts with label construction. Show all posts
Friday, January 18, 2008
Preventing Mold From Invading Your Home’s Construction
One of the worst things that can happen to someone who’s building a brand new home is discovering after the construction is completed that mold has been growing within his new haven. It is indeed a problem and it might be more common than you would think.
Mold can and does get built into new homes and a lot of the time, it’s the fault of the contractor for not properly inspecting or storing his building materials and by allowing the site to get wet from rain before the roof and walls are completed. Sometimes what is supposed to be the interior of the home is left uncovered and when it rains, the building materials get soaked and are allowed to dry this way. In warm, humid weather, this can allow mold to get a grip on the structure and begin to grow. You’ll not only have the possibility of mold, but you’ll also put your home at risk of water damage. Covering the building site with tarps or plastic sheeting should keep the rain, snow, (and the mold) out.
You should make sure that the contractor and his/her workers are using good quality materials to build your new home with. Testing the building materials for mold is one thing that you can do to make certain that it stays out of your home’s foundation. If you go to the building site and you see building materials like wood and sheetrock being stored directly on the ground, tell your contractor that they need to be raised up to aid in the prevention of mold growth. Your contractor should already know this, but irresponsible ones or those that are trying to make the process as easy as possible are the ones that you should worry about. Check your contractor’s references and make sure they’ve done a good job for others in the past.
The home should also be periodically checked for mold as it’s being built and after the building is completed. No one wants to go to the trouble of building a home that will be worth quite a lot of money if it’s only going to have to be gutted to remove mold a few months later, right?
If you’re careful and you keep an eye on your home’s construction, you can prevent most kinds of mold and water damage. If you’re not, you’re asking for quite a headache and the loss of a lot of funds.
Mold can and does get built into new homes and a lot of the time, it’s the fault of the contractor for not properly inspecting or storing his building materials and by allowing the site to get wet from rain before the roof and walls are completed. Sometimes what is supposed to be the interior of the home is left uncovered and when it rains, the building materials get soaked and are allowed to dry this way. In warm, humid weather, this can allow mold to get a grip on the structure and begin to grow. You’ll not only have the possibility of mold, but you’ll also put your home at risk of water damage. Covering the building site with tarps or plastic sheeting should keep the rain, snow, (and the mold) out.
You should make sure that the contractor and his/her workers are using good quality materials to build your new home with. Testing the building materials for mold is one thing that you can do to make certain that it stays out of your home’s foundation. If you go to the building site and you see building materials like wood and sheetrock being stored directly on the ground, tell your contractor that they need to be raised up to aid in the prevention of mold growth. Your contractor should already know this, but irresponsible ones or those that are trying to make the process as easy as possible are the ones that you should worry about. Check your contractor’s references and make sure they’ve done a good job for others in the past.
The home should also be periodically checked for mold as it’s being built and after the building is completed. No one wants to go to the trouble of building a home that will be worth quite a lot of money if it’s only going to have to be gutted to remove mold a few months later, right?
If you’re careful and you keep an eye on your home’s construction, you can prevent most kinds of mold and water damage. If you’re not, you’re asking for quite a headache and the loss of a lot of funds.
Labels:
black mold,
bleach,
construction,
contractor,
mold,
mould,
new home,
restoration,
toxic mold,
water
Subscribe to:
Posts (Atom)

