The bathroom and the kitchen are the two rooms of our homes that, when remodeled, can add the most significant amount of value to it. They are the two centers of our houses, whether we realize it or not. A good house is usually inspected by a few different factors and these two are generally the focal points of many home buyers. Home buyers want to know if a property has a good kitchen and if it has a good bathroom. Depending on what they see, it can make or break a sale.
Unsightly water damage can usually be prevented to either area of the home unless it is caused by mother nature, such as flood or hurricane damage. What can you do to prevent water damage to the two most important rooms of your home..? Similar things can be done in each room to help keep the value of your home from going down.
Taking a bath or boiling water on the stove gives off steam, but there is not always a way for the steam to get out of the room if there is no vent installed. There should be a vent with a fan in each bathroom of the house and the kitchen, as well, to keep the steam from being absorbed by the walls. Drywall that has been damaged in this way usually starts to sag after a while because it has absorbed so much water and not only this, but mold will start to grow on walls that catch steam like this, as well. This is the perfect environment for mold to grow in.
Any plumbing in your bathroom or kitchen needs to be checked on a regular basis for cracks or weak spots in its connections. Anything in your house that uses water coming from the water system in your home needs to be checked on regularly to make sure the chance of a leak sneaking up on you is minimal. Some leaks can sneak up on you while you are away from home or asleep at night, but a lot of time it is caused by just not keeping an eye on worn hoses or damaged pipes.
Sometimes a water heater is located in a pantry or in an area near the kitchen, so keeping a check on this is a good idea, too. The water heater should be set inside of a drain pan that is connected to the water system of your home so that if it does leak, any water is directed down into the septic tank or the sewer.
Showing posts with label clothes. Show all posts
Showing posts with label clothes. Show all posts
Friday, January 18, 2008
Mold Beats Bleach. Bleach does not KILL Mold
What’s the one thing that most of us think cleans and disinfects everything you cover in it? Chlorine bleach. Some new evidence suggests that chlorine bleach isn’t the great cleaner that we all think it is and one of the most common misconceptions about it is that it kills mold. Bleach is good to clean a number of things and to preserve the whiteness of white clothing and other items, but as far as being a disinfectant, it doesn’t measure up.
Unless the mold is located on a non-porous surface such as a hard counter top or a kitchen sink, bleach won’t really do anything to get rid of the mold. You can’t get rid of mold with bleach on surfaces like sheetrock, wood, furniture, or any other surface that isn’t hard and solid. Mold often grows inside walls and even if you clean the mold off of the surface of the wall, you still can’t get inside the sheetrock to completely kill the infection. It infests the entire depth of the board and it’s easier to just remove the sheetrock, clean the mold out from the inside of the wall, and replace the sheetrock with new and paperless sheetrock. Mold eats paper and if you put paper inside your wall, you’re helping it build a home inside your new one.
What we do know about bleach is that it does not play well with other chemicals. Many times when we’re on a budget and we’re trying to make the best of what we have on hand, we mix different household chemicals in order to make more cleaning solution to work with or we’re trying to make ourselves feel like the cleaner has become stronger, because it’s been combined with another. Sometimes mixing household chemicals will do no harm, but it’s best not to mix anything with bleach, especially if it contains ammonia. Ammonia and bleach, when combined, will produce toxic fumes that can kill you if you’re not working in a ventilated area. There are better chemicals to use when fighting mold, so the best thing that you can do is stay away from bleach and never mix it with another ammonia-based cleaner. It’s not worth the risk.
The EPA does not define chlorine bleach as a disinfectant that kills mold. There is always a registration number on each and every product that will kill mold, but this label does not appear on any bottle of chlorine bleach currently in circulation.
Unless the mold is located on a non-porous surface such as a hard counter top or a kitchen sink, bleach won’t really do anything to get rid of the mold. You can’t get rid of mold with bleach on surfaces like sheetrock, wood, furniture, or any other surface that isn’t hard and solid. Mold often grows inside walls and even if you clean the mold off of the surface of the wall, you still can’t get inside the sheetrock to completely kill the infection. It infests the entire depth of the board and it’s easier to just remove the sheetrock, clean the mold out from the inside of the wall, and replace the sheetrock with new and paperless sheetrock. Mold eats paper and if you put paper inside your wall, you’re helping it build a home inside your new one.
What we do know about bleach is that it does not play well with other chemicals. Many times when we’re on a budget and we’re trying to make the best of what we have on hand, we mix different household chemicals in order to make more cleaning solution to work with or we’re trying to make ourselves feel like the cleaner has become stronger, because it’s been combined with another. Sometimes mixing household chemicals will do no harm, but it’s best not to mix anything with bleach, especially if it contains ammonia. Ammonia and bleach, when combined, will produce toxic fumes that can kill you if you’re not working in a ventilated area. There are better chemicals to use when fighting mold, so the best thing that you can do is stay away from bleach and never mix it with another ammonia-based cleaner. It’s not worth the risk.
The EPA does not define chlorine bleach as a disinfectant that kills mold. There is always a registration number on each and every product that will kill mold, but this label does not appear on any bottle of chlorine bleach currently in circulation.
General Mold Facts
We might not like it, but it’s something that we have to live with every day: mold is everywhere. It’s an unfortunate fact that there is no real way to get away from mold completely, as it grows everywhere and it’s in all the air around us.
What is mold? Mold is a kind of fungus that grows in countless numbers and almost countless species all over the world. They are every color you can imagine and while most of them won’t hurt human beings and their pets, some kinds are pretty toxic and can grow in your home. They’re not pleasant to look at and can cause any number of health problems, most notably if you happen to be allergic to that particular kind of mold or just mold in general.
It gets inside your home due to the humidity and high level of heat inside or because of water leaking in from outside the building via the basement or due to flood water. Sometimes it’s because a pipe bursts in your laundry room or the bathroom or the toilet overflows and the water isn’t properly cleaned up. Having carpet in the bathroom is a problem all to itself because it loves to soak up water and mold loves anything porous. The steam from the bath tub or the shower sticks to the ceiling and soaks it, as well, creating a breeding ground for these little buggers. Mold loves to eat sheet rock and paint and some of the most common areas in your home to find mold are in the bathroom and the kitchen.
Some people don’t use a hamper or a basket to toss their dirty clothes in when they take a shower or a bath and they leave the clothes in the bathroom closet directly on the floor. Wet rags and towels being thrown in there on top of them or up against the walls can cause mold to grow not only in the closet, but also on your clothes if they’re left in there long enough.
Mold is a big problem for children, pets, people with weakened immune systems, and the elderly. These are the people that are the most at risk when living in a home that’s contaminated by mold. Mold causes conditions and diseases that most people wouldn’t even begin to think of; the conditions are not confined to merely skin rashes and respiratory complications.
Any and everything that’s been found to have mold on it should be washed and thoroughly sterilized before it can be used again, if it can even be used again at all. Depending on the volume of the infestation and how strenuous your schedule is, sometimes it’s easier to just throw things away.
What is mold? Mold is a kind of fungus that grows in countless numbers and almost countless species all over the world. They are every color you can imagine and while most of them won’t hurt human beings and their pets, some kinds are pretty toxic and can grow in your home. They’re not pleasant to look at and can cause any number of health problems, most notably if you happen to be allergic to that particular kind of mold or just mold in general.
It gets inside your home due to the humidity and high level of heat inside or because of water leaking in from outside the building via the basement or due to flood water. Sometimes it’s because a pipe bursts in your laundry room or the bathroom or the toilet overflows and the water isn’t properly cleaned up. Having carpet in the bathroom is a problem all to itself because it loves to soak up water and mold loves anything porous. The steam from the bath tub or the shower sticks to the ceiling and soaks it, as well, creating a breeding ground for these little buggers. Mold loves to eat sheet rock and paint and some of the most common areas in your home to find mold are in the bathroom and the kitchen.
Some people don’t use a hamper or a basket to toss their dirty clothes in when they take a shower or a bath and they leave the clothes in the bathroom closet directly on the floor. Wet rags and towels being thrown in there on top of them or up against the walls can cause mold to grow not only in the closet, but also on your clothes if they’re left in there long enough.
Mold is a big problem for children, pets, people with weakened immune systems, and the elderly. These are the people that are the most at risk when living in a home that’s contaminated by mold. Mold causes conditions and diseases that most people wouldn’t even begin to think of; the conditions are not confined to merely skin rashes and respiratory complications.
Any and everything that’s been found to have mold on it should be washed and thoroughly sterilized before it can be used again, if it can even be used again at all. Depending on the volume of the infestation and how strenuous your schedule is, sometimes it’s easier to just throw things away.
Your Christmas Tree Can Be A Fire Hazard
Most Christian people have Christmas trees in their home around December, but sometimes think about how pretty the tree is much more than they think about what kind of a hazard it presents to the home when it is improperly cared for. Even though a Christmas tree catching on fire does not happen very often, it still does, and by following a few rules, you can make sure that it does not happen to you.
The tree that you pick should be a fresh one and has next to no needles that are turning brown. They should also be difficult to pull off; if you run your fingers over the needles and they fall off easily, you need to find another tree. Pick up the tree and tap the bottom against the ground to see how many needles fall off. If a lot of the green needles fall off in addition to the brown ones, it has already started to dry out.
When you cut down a Christmas tree, you should never cut it at an angle because this affects the ability of the tree to absorb water. It will dry out much faster than it would if you cut it straight from one side to the other.
One of the first things you need to do is keep the tree watered regularly. A tree that does not receive enough water will dry out and this is the last thing that you want. After the tree starts to shed its needles after Christmas is over, it is time to get rid of it.
They should also not be placed near any source of heat like a fireplace, space heaters, or radiators. Christmas trees only take a moment to catch on fire and once they are, it can be almost impossible to put it out. This is why it is extremely important to make sure that it remains moist by giving it fresh water every day.
If you leave the home and there is not going to be anyone there, it is best to unplug the lights from the wall. You should also do this when you go to bed. It may not seem like the lights would cause that much of a risk, but even small light bulbs can start fires like this.
The tree that you pick should be a fresh one and has next to no needles that are turning brown. They should also be difficult to pull off; if you run your fingers over the needles and they fall off easily, you need to find another tree. Pick up the tree and tap the bottom against the ground to see how many needles fall off. If a lot of the green needles fall off in addition to the brown ones, it has already started to dry out.
When you cut down a Christmas tree, you should never cut it at an angle because this affects the ability of the tree to absorb water. It will dry out much faster than it would if you cut it straight from one side to the other.
One of the first things you need to do is keep the tree watered regularly. A tree that does not receive enough water will dry out and this is the last thing that you want. After the tree starts to shed its needles after Christmas is over, it is time to get rid of it.
They should also not be placed near any source of heat like a fireplace, space heaters, or radiators. Christmas trees only take a moment to catch on fire and once they are, it can be almost impossible to put it out. This is why it is extremely important to make sure that it remains moist by giving it fresh water every day.
If you leave the home and there is not going to be anyone there, it is best to unplug the lights from the wall. You should also do this when you go to bed. It may not seem like the lights would cause that much of a risk, but even small light bulbs can start fires like this.
Great Ways To Conserve Water
During seasons that are very dry across the country, some cities are asking residents to do everything that they can to conserve water and to reduce consumption as much as possible. There are a number of things that you can do to help in this endeavor and save yourself a little bit of money in the mean time.
One of the first things that you can do, if you live in one of these areas, is to not water your lawn as often as you probably do. Many people do this with a garden hose, but if you have sprinklers to do it for you, you should make sure your sprinklers do not waste water by shooting it over the driveway or the sidewalk. Changing the head of the sprinkler may help with this, as well.
Set the timer for your sprinklers for shorter times. This means that you should allow your sprinklers to water their areas for 5 minutes, wait around 15 minutes, and then set it to water for another five minutes. This gives the water that was sprayed the first time a chance to seep down into the soil.
Turn the timer on your sprinklers off when you know it is going to rain. You should not turn it back on for at least 2 or 3 days after it rains and if your sprinkler has a “rain delay” feature on it, you can set this.
Try to water your lawn during the early morning, since the water will not evaporate as quickly and this is a naturally good time for plants to be both fed and watered. Watering should be avoided in the middle of the day, since this is the hottest portion. A large quantity of the water will evaporate and be wasted.
Inside the house, you can reduce your water consumption by taking short showers instead of baths. A ten minute shower with a standard showerhead will amount to about half of a full tub of water or less, so try to take showers, especially if you are trying to get somewhere in a hurry. There is no sense in running a full tub of water if you are going to jump in and then right back out.
Try not to do half loads of dishes or clothes. Even though you can change the amount of water that you use in the clothes washer, you still use about the same amount of electricity to run the cycle, so you are still better off just doing a full load.
One of the first things that you can do, if you live in one of these areas, is to not water your lawn as often as you probably do. Many people do this with a garden hose, but if you have sprinklers to do it for you, you should make sure your sprinklers do not waste water by shooting it over the driveway or the sidewalk. Changing the head of the sprinkler may help with this, as well.
Set the timer for your sprinklers for shorter times. This means that you should allow your sprinklers to water their areas for 5 minutes, wait around 15 minutes, and then set it to water for another five minutes. This gives the water that was sprayed the first time a chance to seep down into the soil.
Turn the timer on your sprinklers off when you know it is going to rain. You should not turn it back on for at least 2 or 3 days after it rains and if your sprinkler has a “rain delay” feature on it, you can set this.
Try to water your lawn during the early morning, since the water will not evaporate as quickly and this is a naturally good time for plants to be both fed and watered. Watering should be avoided in the middle of the day, since this is the hottest portion. A large quantity of the water will evaporate and be wasted.
Inside the house, you can reduce your water consumption by taking short showers instead of baths. A ten minute shower with a standard showerhead will amount to about half of a full tub of water or less, so try to take showers, especially if you are trying to get somewhere in a hurry. There is no sense in running a full tub of water if you are going to jump in and then right back out.
Try not to do half loads of dishes or clothes. Even though you can change the amount of water that you use in the clothes washer, you still use about the same amount of electricity to run the cycle, so you are still better off just doing a full load.
Subscribe to:
Posts (Atom)
